| In addition to the filler/facing materials offered in
the metallic gasket product sections, Teadit offers the following high
temperature materials:
SGL ®SIGRAFLEX TYPE APX2 FLEXIBLE GRAPHITE: Flexible
Graphite with advanced oxidation inhibition & excellent sealabilty.
COGEBI ®:
Phlogopite Hi-Temp grade to 1832 F (1000 C). Used in some hot gas
applications, and as filler/facing for spiral wound & camprofile gaskets
and as an oxidation barrier in combination with other sealing materials.
CERAMIC FIBER:
Used in some hot gases/ low pressure service. This material is also used
as filler for metallic gaskets or in combination with other sealing
materials. Temperature limit: 2000° F (1090° C).
Contact Teadit's Technical Department for assistance
with your high temperature applications.
Properties and application parameters shown throughout
this datasheet are typical. Your specific application should not be
undertaken without independent study and evaluation for suitability. For
specific application recommendations consult Able Industrial. Failure to
select proper sealing products could result in property damage and/or
serious personal injury. Specifications are subject to change without
notice. This edition supersedes all previous issues. |
