CONSTRUCTION
Style NA1080
is a compressed non-asbestos
sheet gasket material produced from a combination of Aramid Fiber,
Inorganic Fillers and bonded with Styrene-Butadiene Rubber (SBR). It
is manufactured under rigorous quality control standards that are
registered under ISO-9001 certification.
APPLICATION / SERVICE
Style NA1080
has numerous applications in
the process industries handling media like: mild acids and alkalis,
water, brine, saturated steam, air, industrial gases, general
chemicals, neutral solutions.
|
SERVICE
LIMITS |
| Type |
Description |
Value |
| Temperature Limits |
Maximum |
716°F (380°C) |
| |
Continuous Max |
490°F (270°C) |
| Pressure Limits
(Vacuum) |
Maximum |
1015 psi (70 bar) |
| |
Continuous Max |
725 psi (50 bar) |
| ASTM Line Call Out
F104 |
F712940E44M5 |
|
| Color |
Off White |
|
| Available Sheet
Sizes |
Thickness |
From 1/64" (0.4mm) to
1/8" (3.2mm) |
| |
Sheet Sizes |
59" (1500mm) x 63"
(1600mm) |
| |
|
59" (1500mm) x 126"
(3200mm) |
|
TYPICAL
PHYSICAL PROPERTIES |
| ASTM Test Method |
Property |
Value |
| - |
Density |
122 lb/ft3
(1.96 g/cc) |
| F36 |
Compressibility |
7-17% |
| F36 |
Recovery |
min 45% |
| F152 |
Tensile Strength |
2030 psi (14 MPa) |
| F495 |
Ignition Loss |
max 28% |
| F146 |
Thickness Increase
After 5 Hour Immersion |
|
| |
ASTM oil IRM 903 @300°F (150°C)
|
max 40% |
| |
ASTM Fuel B @ 77ºF (25ºC)
|
max 20% |
| F146 |
Weight Increase After
5 Hour Immersion |
|
| |
ASTM oil IRM 903 @300°F (150°C)
|
max 30% |
| |
ASTM Fuel B @ 77ºF (25ºC)
|
max 30% |
| F38 |
Creep relaxation |
22% |
| |
Torque Retention (DIN
52913) |
37 N/mm2 |
| F37 |
Sealability at 1000
psi |
0.25 ml/h |
| |
Pressure x Temperature
|
|
The P x T graph shown above indicates the
service limits for this sheet considering pressure and
temperature simultaneously...(Tests were performed with
nitrogen on 1.6mm thick sheet). The "normal" curve
represents the common usage area for this sheet while the
"maximum" curve indicates the maximum limits. For
applications near or above the "maximum" curve, contact Able
Industrial. |
Properties and application parameters shown
throughout this datasheet are typical. Your specific application
should not be undertaken without independent study and evaluation
for suitability. For specific application recommendations consult
Able Industrial. Failure to select proper sealing products could
result in property damage and/or serious personal injury.
Specifications are subject to change without notice. This edition
supersedes all previous issue
|
