CONSTRUCTION
Style NA1001
is a compressed non-asbestos
sheet gasket material produced from a combination of aramid and
other synthetic fibers and bonded with nitrile rubber (NBR). It is
manufactured through the hot calendar process under rigorous quality
control standards that are registered under ISO-9001 certification.
APPLICATION / SERVICE
Style NA1001
is a very good general service
gasket material that has numerous applications in the process
industries and in the water and wastewater industry. It is also
commonly used in equipment such as valves and pumps. Style NA1001 is
suitable for service handling the following general media
categories:
|
|
Mild inorganic acids
|
Mild organic acids
|
Refrigerants
|
|
Diluted alkalis
|
Water
|
Brine
|
|
Aliphatic solvents
|
Industrial gases
|
Animal oils
|
|
Synthetic oils
|
Vegetable oils
|
Petroleum and Derivatives
|
|
General chemicals
|
Neutral solutions
|
Air
|
| |
|
|
|
SERVICE
LIMITS |
| Type |
Description |
Value |
| Temperature Limits |
Maximum |
750°F (400°C) |
| |
Continuous Max |
460°F (240°C) |
| Pressure Limits
(Vacuum) |
Maximum |
1595 psi (110 bar) |
| |
Continuous Max |
725 psi (50 bar) |
| ASTM Line Call Out
F104 |
F712120E22M5 |
|
| Color |
Green or White |
|
| Available Sheet
Sizes |
Thickness |
1/64", 1/32", 1/16",
3/32", 1/8" |
| |
Sheet Sizes |
59" x 63" |
| |
|
59" x 126" |
| |
|
118" x 126" |
|
TYPICAL
PHYSICAL PROPERTIES |
| ASTM Test Method |
Property |
Value |
| - |
Density |
109 lb/ft3
(1.75 gm/cc) |
| F36 |
Compressibility |
7-17% |
| F36 |
Recovery |
min 45% |
| F38 |
Tensile Strength
Across Grain |
1670 psi (11.5 N/mm2) |
| F495 |
Ignition Loss |
max 34% |
| F146 |
Thickness Increase
After 5 Hour Immersion |
|
| |
ASTM IRM 903 @300°F (150°C)
|
max 12% |
| |
ASTM Fuel B @77°F (25°C)
|
max 10% |
| F146 |
Weight Increase After
5 Hour Immersion |
|
| |
ASTM IRM 903 @300°F (150°C)
|
max 15% |
| |
ASTM Fuel B @77°F (25°C)
|
max 15% |
| F38 |
Creep Relaxation |
25% |
| |
Torque Retention (DIN
52913) |
28 N/mm2 |
| F37 |
Sealability at 1000
psi |
0.25 ml/h |
| |
Pressure x Temperature
|
|
The P x T graph shown above indicates the
service limits for this sheet considering pressure and
temperature simultaneously...(Tests were performed with
nitrogen on 1.6mm thick sheet). The "normal" curve
represents the common usage area for this sheet while the
"maximum" curve indicates the maximum limits. For
applications near or above the "maximum" curve, contact Able
Industrial. |
Properties and application parameters shown
throughout this datasheet are typical. Your specific application
should not be undertaken without independent study and evaluation
for suitability. For specific application recommendations consult
Able Industrial. Failure to select proper sealing products could
result in property damage and/or serious personal injury.
Specifications are subject to change without notice. This edition
supersedes all previous issue
|
